-40%

DIY Night Vision Scope Day Night Rifle Scope w/ 850nm IR Torch 4.3" LCD Screen

$ 46.98

Availability: 19 in stock
  • MPN: Does Not Apply
  • Item must be returned within: 30 Days
  • Sub-Type: Rifle Scopes
  • Features: Waterproof, Night Vision
  • UPC: Does not apply
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: 100% New
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Brand: Unbranded

    Description

    Product Description
    DIY Night Vision Scope Day Night Rifle Scope w/ 850nm IR Torch 4.3" LCD Screen
    38-45 Night Vision Day Night Rifle Scope 4.3'LCD Monitor Infrared Laser Torch 25mm / 30mm Mount
    The adapter should connect to the CCD Lens with small screws by yourself, and can around a circle tape to protect the lens.
    Features:
    Suitable for riflescopes' eyepiece diameter: 38-45mm
    Night vision distance: up to 200 meters during full night vision.
    Day and night dual use
    With special laser flashlight.
    Total use 3 pcs 18650 Lithium battery(not included for safety)
    Characteristics:
    1 Star Ultra low-light, night vision of the true king! Ignoring the darkness, brightness extraordinary
    2 Resolution up 1000TVL, wide dynamic function, inhibit glare
    3 Support for IR-CUT, infrared light board, color to black for synchronization
    Specification:
    Imaging Chip:Rockchip 1 / 2'MCCD BG0601
    Signal System:PAL or NTSC
    Resolution:> 1000TVLines(color) / 1200TVLines (black and white)
    Pixels:PAL 768*586 / NTSC 768*480
    Min Illumination:0.0001Lux (F1.2)
    Shutter Time:PAL 1/50~1/100000sec NTSC 1/60~1/100000sec
    Signal to Noise:> 60dB
    White Balance:Auto White Balance (AWB)
    Gain Control;Auto
    Languages:Chinese, English Optional
    Mirror Display:YES Manual optional
    Motion detection:YES Area can be adjusted
    Privacy Mask:YES Area can be adjusted
    Backlight Compensation: Auto
    Digital zoom:YES MAX 5x
    Day&Night:External Trigger
    Signal Out:1.0Vp-p,75 Ohm
    Power Voltage:6.0-8.4V or 6-13V ±10%
    Power current:80mA
    work Environment:B24+50°,RH90% MAX(non-condencing)
    PCB Size:38*38MM
    Package Included:
    1 x Night vison camera with 25mm Lens
    1 x 4.3" LCD Screen
    1 x 850nm Laser flashlight
    1 x 25mm Mount  / 30mm mount
    1 x Night vision Batteries Charger
    NOTE:
    1.Laser infrared light upgraded, not an ordinary LED infrared light, laser effect and the distance is 3 times the same infrared LED.
    2.The night vision instrument can be used by night and day, and the daytime is color mode, when the light is not enough, it automatically switches to black and white mode.
    3.Night vision sight 2 rechargeable batteries can be used for more than 4 hours for a long time.
    B-198H instructions:
    Thank you for choosing dalian BOYIN research and development of B - 198 - h intelligent thermostat products, in order to convenient you choose and buy and safe, correct and efficient use of this product, please read this manual carefully and it is important to note the following points when using.
    CAUTION:
    ◆ The product must be professional personnel for maintenance
    ◆Pieces for this product, prior to any internal procedures must be cut off power supply;
    ◆Pieces for the use of the product should be within the rated parameters
    Technical parameters
    1、Power:AC220V   50Hz;
    2、The maximum load power:2000W;
    3、The operating temperature of the thermostat:0℃~40℃
    4、Temperature measurement range:-35℃~55℃;
    5、The refrigeration temperature control:-30℃~38℃, 3 minutes to boot time delay;
    6、Heating temperature control:+5℃~45℃;
    7、Back to the temperature difference:±1℃;
    8、Temp Accuracy:±1℃;
    9、Swap sensor precision:R:10KΩ±1%,B:3470±1%
    operating instructions
    1、Power
    Controller connected to the power supply, the thermostat is introspected, digital tube all show, light is on. After 3 seconds, the digital tube display the current actual temperature, the corresponding indicator light is lit, and according to the set temperature。The factory default heating value of 25 ℃, cooling value of 5 ℃, work status to heating.
    2、Indicator light
    Panel lights huang said heating mode, the green light said cooling mode, the red light is for heating or cooling operation, the red light goes out the current temperature reaches the set temperature requirements.
    state switch
    Cut key and hold more than 4 seconds don't let go of can achieve refrigeration and heating state switch, switch, the corresponding indicator light is lit.
    Temperature setting
    1)Set the button: used for switching between normal operation and the temperature setting.
    Press the set key, the digital tube twinkle, the state of temperature setting (heating and cooling temperature is set respectively, don't share the same temperature set point).Then press raised or lowered keys to set temperature, until the temperature of his/her needs.Press the set key again, digital tube stop flashing, save and return to the normal operation of the set temperature.In temperature setting state, 5 seconds don't press any key, the thermostat will automatically save the current set temperature and return to the running state.
    3)raised key: used to set temperature rising.
    In setting state, every click this button and set the temperature of 1 ℃, press and hold the key not to put can increase continuously, until the temperature of the heating or cooling ceiling (heating and cooling temperature control limit).
    cut key: used to reduce the set temperature.
    In setting state, every click this button, set temperature decrease 1 ℃, press and hold the key not to put can reduce continuously, until the heating or cooling temperature limit (heating and cooling temperature lower limit).
    Working mode
    Refrigeration: when the control temperature set temperature + 1 ℃ or higher, connected to the load power;When the control temperature set temperature or less - 1 ℃, cut off the load power;
    Heating: when the control temperature set temperature + 1 ℃ or higher, to cut off the load power;When the control temperature set temperature or less - 1 ℃, connected to the load power;
    Fault protection function
    1, when the sensor circuit, digital tube display (dd), enter the fault operating mode, the sensor exit immediately after returning to normal fault operation mode.
    2, when sensor open circuit, digital tube display [-], into fault operation mode, the sensor exit immediately after returning to normal fault operation mode.
    3, fault operation mode: 10 points and 20 points, so cycle
    Power off memory function
    Power grid after wired controller according to the last set temperature operation of the memory
    Payment
    Shipping
    Returns
    Contact Us
    We ONLY accept PayPal, Other payment methods are NOT accepted.
    Payment MUST BE MADE within 5 business days after the end of the aution, Unpaid dispute will be filed to ebay for the non payable bidders.
    We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
    Item will be sent out by Air mail within 24-48 hours after clear payment
    (excluding weekend & holiday)
    .
    Arrival time (estimated):
    - United Kingdom 10-20 working days
    Shipping time is only estimated and not guaranteed. If not get item after 30 days, please contact us for solve.
    We can exchange the item within 30 days after you received it if it is defective. Returned item must have all original packaging and accessories.
    Buyer are responsible for the returning shipping costs under any circumstances.
    It may take up to 5 business days to process your return after we receive your product.
    We don't offer combine shipping.
    We will send it as a personal gift with a low value. But if there exits any tariff, you will pay for it.
    If you have any questions please contact us before you leave us neutral or negative feedback, we will try our best to resolve the problem. We will greatly appreciate for your cooperation.
    Due to the difference of time zone, sometimes the reply to your message will be delayed with 24 hours (excluding weekend & holiday).
    Payment
    We ONLY accept PayPal, Other payment methods are NOT accepted.
    Payment MUST BE MADE within 5 business days after the end of the aution, Unpaid dispute will be filed to ebay for the non payable bidders.
    Shipping
    We ship to PayPal's address ONLY. Please make sure your address in PayPal is matched with your shipping address before you pay.
    Item will be sent out by Air mail within 24-48 hours after clear payment
    (excluding weekend & holiday)
    .
    Arrival time (estimated):
    - United Kingdom 10-20 working days
    Shipping time is only estimated and not guaranteed. If not get item after 30 days, please contact us for solve.
    Returns
    We can exchange the item within 30 days after you received it if it is defective. Returned item must have all original packaging and accessories.
    Buyer are responsible for the returning shipping costs under any circumstances.
    It may take up to 5 business days to process your return after we receive your product.
    We don't offer combine shipping.
    Contact Us
    We will send it as a personal gift with a low value. But if there exits any tariff, you will pay for it.
    If you have any questions please contact us before you leave us neutral or negative feedback, we will try our best to resolve the problem. We will greatly appreciate for your cooperation.
    Due to the difference of time zone, sometimes the reply to your message will be delayed with 24 hours (excluding weekend & holiday).
    powered by