XYZ Da Vinci 3D Printer Filament Cartridge Counter Resetter - 240M ABS

Description

New message from: strawberryice (665Purple Star)
It finally worked today!!!! I'm so happy! Thank you for your time and help.
Reply
Your previous message
not this one !! see photo for correct one. i need front and back of this
strawberryice:
Here you go pic attached
Your previous message
please take a photo of the chip with wire connect ! from last photo i saw the connection is wrong. wait for your reply
strawberryice:
My husband looked at it and said I am hooking it up correctly from the picture you sent me. We don’t understand what you are saying is wrong? My husband is an electrician too.
Your previous message
No Problem
strawberryice:
Oh wow ok..... ok I’ll try it again soon. I’m new at this. lol Thank you for your time and help! It is much appreciated
Your previous message
you connect wire wrong !!
please connect one wire to 5V on board and middle wire to D7 on board and last wire to GND on board
then see this photo to do touch
https://i.ebayimg.com/images/g/CooAAOSwO0VdljcI/s-l1600.jpg
Each unit is checked and tested on a da vinci duo 2.0, or a 1.0 and a PRO printer before it gets shipped, so I know that every unit works, I have reset the same cartridges many many times and they still work perfectly. Just look at the feedback from my genuine customers.
Each unit is checked and tested on a da vinci duo, pro and 1.0a printer before it gets shipped, so I know that every unit works, I have reset the same cartridges over 300 times and they still work perfectly.
Resets to 240 meters
Pla cartridge reset to 240m
Easy to use, just
1. Turn off your printer
2. Remove the cartridge
3. Place the cartridge on the resetter
4. Switch button to on position
5. The led will flash then stay on for a second
6. Switch button off
7. Job done
Model                             firmware
Da vinci 1.0                   1.1.G, 1.1.I, 1.1.J , 1.1.3 and the latest
Da vinci 1.0a                1.0.1, 1.0.3, 1.0.5, 1.0.6* 1.2.2 and the latest
Da vinci duo 2.0         2.0.J and the latest
Da vinci aio                 1.1.1, 1.1.3, 1.1.4, 1.1.5 1.1.6 and the latest
Da vinci pro                 1.3.0 and the latest
Da vinci 1.1 plus          1.1.9.13 and software up to 2.1.10.3 and the latest
Sorry it does not.... Work on a junior or a mini.....
Notes: (*) only resets filament counter, no temperature control.
Hotend Temp 210c ~ 235C
Heated Bed Temp 90c
Does set pla cartridge, but I use abs settings for my pla reels and I get perfect prints.
I build these from scratch so it takes a day or three to get it done, with other printing jobs in line.
Parts are 3d printed using a da vinci 3d duo printer, da vinci pro or da vinci 1.0a
Colour selection on the slicer software might stay the same as original cartridge
Colour of unit supplied may be different to picture.....
(the design may change, but it will do the same job, trying to streamline the build process)
This item is handmade to order, it is tested before I post,